Design insights & tutorials.

Tutorial: Death Metal Logo

Turquoise Flag-Tip

I have been creating extreme metal logos for over 4 years now for many bands all over the world. Being an extreme metal fan and a logo designer, it was only natural for me to start creating logos for the metal scene. The demand for these logos were more popular than I expected and I managed to get quite a lot of work from it alongside my studies.

Now that I am focusing on different area’s of work I have decided to write a tutorial to explain in detail how I went about creating the most popular of all my logos; the death metal logo. This will be a symmetrical, hand rendered, vector logo.

Step 1

First of all, it is important to know a lot about the band the logo is for. What sub genre do they fit in? (technical death metal/progressive death metal/old school death metal) What are the lyrics about? (politics/urban life/religion) What type of audience are they trying to attract? (mainstream/underground).

Once you have collected enough information about the band, you can then start researching the relevant visuals. If you are not so familiar to death metal then its a good idea to find as many logos you can to use for inspiration. To make the logo more unique its a good idea to find inspiration elsewhere including religious/medieval/occult symbols, typography, non-metal logos etc.

The logo I am using for this tutorial was for an old school death metal band. They had influences from hardcore punk and the lyrics were about politics and society. I took inspiration from death metal logos, punk logos, gothic architecture, the Book of Kells, Blackletter fonts and ambigrams.

Step 2

You should now start drawing the logo straight onto paper. Start drawing the letters from your influences, if you lack experience in working with typography pay careful attention to the fonts. They dont need to be perfectly drawn or measured, we will use Illustrator to do all of that. Spend a lot of time on the sketches, creating at least 3 or 4 that you are happy with as these sketches will determine how good the logo is.

Some letters are more difficult to make symmetrical than others, use backwards letters if necessary or make 2 thin letters symmetrical to one wider letter. You might want to just keep the first and last letter symmetrical if you want it very legible. Try to keep the widths of the letters as consistent as possible. It helps to understand the basics of typography.

Some letters a more tricky than others to make symmetrical. It is sometimes a good idea to start with the most complex letter, then draw a flipped version of the to use as a template. You can then try to fit the other letter inside the template as best as possible. Sometimes the first letter will still need to modified to get a balance between the 2.

Here are some examples of sketches where I have had to make 2 letters symmetrical with each other. The green area’s are where the template was drawn from the other letter. Once you have drawn around that it should then be erased.

Once you have some sketches you are happy with, scan it in, get the band to pick their favorite.

Step 3

Open up a new Illustrator document at any size/mode. Import > Place the sketches in. Go to View > Rulers. Then drag down rulers wherever things need to be on the same level and wherever you want straight lines.

Step 4

Lock the layer with the sketch on and open up a new layer. Make the fill color transparent and the stroke color a bright red. Select the Ellipse tool and draw circles wherever there are curves in the logo. The more thorough you are, the smoother your logo will look.

Step 5

Open up a new layer, drag this layer under the layer with the circles on and lock the layer with the circles on. Select the pen tool, change the fill color to black and make the stroke transparent. Now start to draw in the shapes, using the guides and circles to help you. Just do it shape by shape, don’t worry about making everything join.

Zoom in and use the anchor points to get it as smooth as possible. If you have trouble seeing the sketch underneath, go to Window > Transparency and select 50%.

Step 6

Use this opportunity to change any parts of the letters to make them look better. Make sure any symmetrical letters are perfectly symmetrical by drawing one side, duplicating it (alt+mouse) and using the selection tool to flip it over.

Step 7

Now you have half of the logo complete, create another new layer. Copy and paste all the letters onto the new layer, make the Fill transparent and the Stroke blue. Flip them so they are completely symmetrical to the other half of the logo. Place each letter over the closest matching part of the other side. Lock that layer, go back to the main penning layer. Now draw in all of the other letters using the blue outlines as a guide. Compromise between the 2, this can be tricky, just find a balance of keeping it symmetrical and legible. Keep working at this until you get all the letters the way you want them.

Step 8

Go to View > Grid and use the rulers to give the logo consistent spacing and alignment. If everything looks exactly how you want save the file and go to Export and save as JPG just to show the band and so you can view it outside of Illustrator. Make any changes before continuing.

Step 9

Although the logo is now finished in black and white vector form, bands usually want the logo in different colors and textures. This could be achieved in Illustrator but I find Photoshop is easier to use, although it will no longer be scalable.

Select all the letter Shift+Drag the logo out until the width is at least over 1000 pixels (about three times the width of an A4 page). Select Edit > Copy, open up Photoshop. Open up a new document and paste as a Vector Smart Object. I find that the best ways of creating textures is using textures from photos (www.imageafter.com) to fit inside the letters. Grunge brushes are also useful. Then play around with the layer styles until you have something you and the band are pleased with.

You should now have a professional looking symmetrical death metal logo. If it did not turn out as well as you had hoped, don’t worry, just keep practicing. Learning about typography and really paying attention to detail will help a lot.

About the Author, James Stone

I am a digital designer with particular interests in virals, data visualization, and typography. You can Visit My Website and Follow Me On Twitter
Discover More by James Stone

Discussion

We want to hear what you have to say. Do you agree? Do you have a better way to approach the topic? Let the community know by joining the discussion.

  • http://twitter.com/blackavalon Carmen Anzelmo

    Interesting tutorial. I love typography and I think death metal logos are the best if you want to practise. Great job.

  • Rui

    Awesome! Loved it.

  • http://www.avangelistphotography.com Avangelist

    And in true death metal style another useless logo that is illegible.
    That's not a negative, sadly for some reason it has become an integral part of the scene.
    It's the most ridiculous thing ever, you would think these people wanted the public to know they're called mum's bleeding hole filled with pig vomit, instead you get a 16yr old's first tribal tattoo that may or may not say something.

    Really good explanation on using illustrator for font work and on how to effectively digest the wording letter by letter.

  • http://www.colorexpertsbd.com/ Clipping Path

    Nice job! thanks for sharing…I always love to read your blog post!

  • Rory

    Very cool logo tutorial. I know a couple of bands on my local scene that could benefit from reading this.

  • Adam_Wagner

    In the image of the sketches, I prefer the one in the lower left to the one finally chosen. Both are nice though.

  • http://www.anythinggraphic.net Anything Graphic

    SICK!!!!

  • http://www.colorexpertsbd.com/ Clipping Path

    Nice post! :)
    thanks for sharing…
    I always love to read your blog post!

  • http://www.kapridesign.com/ Kapri Design

    Very cool logo. Nice that you point out the importance of sketching. I also like your logo for Misanthrope.

    Recently created a logo for a hardcore punk / metal band. Instead of hand drawn letters I went for a more working class / urban style by using a gothic font. Let me know what you guys think: http://img341.imageshack.us/img341/9528/logosca

    • http://www.facebook.com/ollienewmanx Ollie Newman

      what was the font, that is actually amazing

  • http://www.geoffmay.com Geoff May

    Great tutorial!

  • John

    Great post!
    dizi izle

  • John

    Great post!
    dizi izle

  • John

    Great post!
    dizi izle

  • John

    Great post!
    dizi izle

  • http://www.colorexpertsbd.com/ Image Masking

    It was really gr8 post!
    thanks for sharing…
    I love it! :)

  • http://iphonejailbreak.us Iphone Jailbreak

    wow….very awesome.. cool logo!

  • http://www.lookatmycrazyshoes.com/fitflop-walkstar-iii-p-2347.html walkstar

    I felt it's quite interesting and the step wise explanation made it very easy to make. At the first glance I felt it's quite difficult but the tutorial made it very easy. Thanks a ton for it.

  • http://vibramshoesonline.com/ vibram stores

    I really like this type of Merchandise too, can you help me look at which one has higher price point? http://vibramshoesonline.com/

  • http://vibramshoesonline.com/ vibram fivefingers

    I really like this type of vibram stores too, can you help me look at which one has higher price point?
    http://vibramshoesonline.com/

  • Gemredpanda

    Avangelist , I have to agree with you. I'd rather not strain my eyes trying to figure out what something says. If youre trying to sell a product-and lets face it, thats all every band is- a logo is supposed to be easy to read and readily identifiable–this is neither. The tutorial is good, its just that as far as designing a logo goes, it missed the mark

    • Ig0tma-newkix

      gemrepandra if u are straining ur eyes to attempt to read something then u probably shouldnt be reading it anyways and if u think that bands are just a product u need to wake up logos dont always have to be easy to read sometimes they are ment to spark curiosity not just an attempt to sell something or pass information this tutorial is great and it didnt “miss the mark” this is how logo’s are made -.- ….. you… are… an idiot.

    • plaguesofwrath

      Not really sure why you’d be straining your eyes to read this logo, it’s pretty easy to read. Especially compared to a lot of other death metal logos. You must just be complaining for the sake of complaining…

  • http://twitter.com/jistone James Stone

    The idea behind these logo's is to be subversive to the mainstreem corperate world. Within commercial graphic design everything is trying to be as simple and legible as possible, so it makes sense for these logo's to be complex and difficult to read.

    People not liking the logo's because they are too hard to read is just like people not liking the music because its too loud and aggressive or they can't hear the lyrics or whatever. The genre was never intended to appeal to everyone and by doing the opposite it gains notorioty and a neiche subculture of its own.

  • SerpentbreeD

    Nice, been thinking about a logo for my band, and this tutorial finally helped me to put my ideas into a shape.

    Thanks alot!

  • http://www.photoshopclippingpath.us Photoshop Clipping Path

    Stunning! Very well done!

  • http://www.photoshopclippingpath.us Photoshop Clipping Path

    A brilliant and resourcefully post

  • http://cargocollective.com/ianvox Ianvox

    cool tutorial

  • http://www.facebook.com/people/Tekno-Loji/1152739199 Tekno Loji

    Thanks

    travesti

  • vibram fivefingers

    Thanks for writing this. I really feel as though I know so much more about this than I did before. Your blog really brought some things to light that I never would have thought about before reading it. You should continue this, Im sure most people would agree youve got a gift.

  • http://www.designmybox.com Manik

    Thanks. You didn’t spend time on how to create the logo on Illustrator. You told us how to visualize the logo & how to go about working from conception to sketch.
    Good tutorial.

  • http://www.evdenevenakliyatsec.com/ evden eve nakliyat

    Does Microsoft Own Ctfmon.exe this program

  • http://twitter.com/corycollier Cory Colllier

    Great tutorial here! I know a few folks who will eat this up!

  • http://logodesignswork.com/Web-Design/Web-Design.html Custom web design

    I have been creating extreme metal logos for over 4 years now for many bands all over the world. Being an extreme metal fan and a logo designer, .

  • http://www.facebook.com/people/John-Cole/1338956299 John Cole

    Great stuff!!!

  • http://www.klavisnurs.com Klavis

    Thanks. You didn’t spend time on how to create the logo on Illustrator.
    You told us how to visualize the logo & how to go about working from
    conception to sketch.
    Good tutorial.

  • http://www.drmustafaerarslan.org/ panax

    Very cool and interesting article